ECLIPSE Expansion Module – 2 Lighting Zones – Lumishore 60-0497

ECLIPSE Expansion Module – 2 Lighting Zones – Lumishore 60-0497

Product Code / SKU: 60-0497

Product ID: 354994988

Description:

The Lumishore ECLIPSE Expansion Module 2 Zones (60-0497) is an expansion unit for the ECLIPSE Command Center system, which adds two additional lighting zones. It allows for the control of two independent areas – each zone supports up to 16 lamps, with a maximum current of up to 10 A per zone. The module works with both above-water and underwater ECLIPSE lamps. Control can be achieved through a standard switch, via WiFi, and through compatible MFD displays. The housing has an IP67 protection rating – resistant to marine conditions; plug-and-play installation.

Technical Features:

• Power Supply: 12 V DC (acceptable range: 10-15 V) :contentReference[oaicite:0]{index=0}
• Maximum Total Current: **20 A** (2 zones of 10 A each) :contentReference[oaicite:1]{index=1}
• Maximum Current per Zone: 10 A :contentReference[oaicite:2]{index=2}
• Protection Rating: **IP67** – resistant to moisture and weather conditions :contentReference[oaicite:3]{index=3}
• Number of Lamps per Zone: up to 16 lamps :contentReference[oaicite:4]{index=4}
• Safety Features: reverse polarity protection, surge protection, low-voltage protection :contentReference[oaicite:5]{index=5}
• Module Dimensions (without connectors): approx. **116 mm × 84 mm × 39 mm** :contentReference[oaicite:6]{index=6}
• Housing: strong ABS resistant to marine conditions, halogen-free and flame retardant :contentReference[oaicite:7]{index=7}
• Supported Lighting Functions: dimming, color selection (if the lamps support it), strobe, "Sound-to-Light" effects for RGBW lamps :contentReference[oaicite:8]{index=8}
• Control: via switch, WiFi, compatible MFD devices / certified Lumishore displays :contentReference[oaicite:9]{index=9}

Application:

The module is useful if you want to increase the number of lighting zones in the ECLIPSE system – for example, an additional area that needs to be independently illuminated (e.g., cockpit, stairs, gunwale, decorative lighting). It allows you to manage additional groups of lamps without the need to purchase an entirely new control system. It works well on boats, yachts, in applications above and below water, maintaining high resistance and quality.

Notes:

• The module requires a compatible ECLIPSE Command Center; ensure that the system allows for zone expansions. :contentReference[oaicite:10]{index=10}
• The power supply voltage must be stable – use appropriately sized wires, short runs, to avoid voltage drops that can affect brightness/colors.
• Despite IP67 – wires and connectors should be well sealed; installation according to the manufacturer's instructions.
• The total current of the system after adding this module (along with lamps in previous zones) must be below the limit; do not overload the installation.
• Pay attention to the firmware version of the Command Center and ECLIPSE modules – sometimes expanding zones requires an update.